A new parameter called the Galling50 value is proposed to provide a statistically relevant measure of galling resistance. The Galling50 value represents the stress value where galling is expected to occur in 50% of the specimens tested. Galling50 is determined from the analysis of a series of tests that measure the probability of galling at different applied stresses. A method for graphically representing experimental galling data is presented. A sigmoidal function is used to mathematically represent the overall performance of the galling results. Similar to previous test methods, the proposed method provides a single parameter for reporting galling resistance results, making it suitable for comparison between different materials and test conditions. Test results for type 303, 304, and 316 stainless steels are given as an example of the testing and data reduction technique.

1.
ASTM Committee G02 on Wear and Erosion
, 2008, “
Standard Terminology Relating to Wear and Erosion
,”
G40-05, Annual Book of ASTM Standards, 03.02
,
ASTM International
,
Philadelphia, PA
.
2.
Hirasaka
,
M.
, and
Nishimura
,
H.
, 1994, “
Effects of the Surface Micro-Geometry of Steel Sheets on Galling Behavior
,”
J. Mater. Process. Technol.
0924-0136,
47
, pp.
153
166
.
3.
Schey
,
J. A.
, 1983,
Tribology in Metalworking: Friction, Lubrication and Wear
,
ASM International
,
Metals Park, OH
.
4.
Hogmark
,
S.
,
Jacobson
,
S.
, and
Wanstrand
,
O.
, 2000, “
A New Universal Test for Tribological Evaluation
,”
Proceedings of the 22nd Meeting of the International Research Group on Wear of Engineering Materials IRG-OECD
,
University of Cambridge
,
Cambridge, UK
.
5.
Podgornik
,
B.
,
Hogmark
,
S.
, and
Pezdirnik
,
J.
, 2004, “
Comparison Between Different Test Methods for Evaluation of Galling Properties of Surface Engineered Tool Surfaces
,”
Wear
0043-1648,
257
, pp.
843
851
.
6.
Ives
,
L. K.
,
Peterson
,
M. B.
, and
Whitenton
,
E. P.
, 1989, “
The Mechanism, Measurement, and Influence of Properties on the Galling of Metals
,” US Department of Commerce, National Institute of Standards and Technology, Materials Science and Engineering Laboratory, Ceramics Division, Report No. NISTIR 89-4064.
7.
Swanson
,
P. A.
,
Ives
,
L. K.
,
Whitenton
,
E. P.
, and
Peterson
,
M. B.
, 1988, “
A Study on the Galling of Two Steels Using Two Test Methods
,”
Wear
0043-1648,
122
, pp.
207
223
.
8.
Hummel
,
S. R.
, 2001, “
New Test Method and Apparatus for Measuring Galling Resistance
,”
Tribol. Int.
0301-679X,
34
, pp.
593
597
.
9.
Hummel
,
S. R.
, and
Partlow
,
B.
, 2003, “
Threshold Galling Load and Frictional Behavior of Stainless Steel Couples in Line Contact
,”
Wear
0043-1648,
255
, pp.
504
508
.
10.
ASTM Committee G02 on Wear and Erosion
, 2002, “
Standard Test Method for Galling Resistance of Materials
,”
G98-02, Annual Book of ASTM Standards, 03.02
,
ASTM International
,
Philadelphia, PA
.
11.
Schumacher
,
W.
, 1973, “
New Galling Data Aid in Selecting Stainless Steel
,”
Mater. Eng.
, pp.
60
61
.
12.
Carpenter Stainless Steels
, 1999, Carpenter Technology Corporation, Reading, PA.
13.
Hummel
,
S. R.
, 2008, “
Development of a Galling Resistance Test Method With a Uniform Stress Distribution
,”
Tribol. Int.
0301-679X,
41
, pp.
175
180
.
14.
ASTM Committee G02 on Wear and Erosion
, 2008, “
Standard Test Method for Galling Resistance of Material Couples
,”
G196-08, Annual Book of ASTM Standards, 03.02
,
ASTM International
,
Philadelphia, PA
.
15.
Press
,
W. H.
,
Teukolsky
,
S. A.
,
Vetterling
,
W. T.
, and
Flannery
,
B. P.
, 1992,
Numerical Recipes in Fortran
, 2nd ed.,
Cambridge University Press
,
New York, NY
, p.
372
.
You do not currently have access to this content.