As a novel layered material, black phosphorus (BP) shows unexpected characteristics in many aspects including tribological application. In this work, BP was prepared through ball milling from red phosphorus (RP). The boundary lubricating properties of the BP nanosheets were investigated on a ball-on-disk tribometer as lubricating additives in polyalphaolefin oil. The micromorphologies, concentration, and composition of the typical chemical elements on the worn surfaces were measured by the 3D laser scanning microscope, scanning electron microscope, and X-ray photoelectron spectrometer, respectively. The results show that bulk BP can be found after RP was milled at 500 rpm for 36 h. The Raman intensity of the BP increased initially and then decreased with the increase in milling time, and the maximum intensity can be obtained at 60 h. The BP nanosheets displayed excellent antifriction and anti-wear performances as lubricating additives in PAO6 oil for steel/steel contact in boundary lubrication regime. The boundary lubrication mechanism of the BP nanosheets is dominated by the physical slippery effect of the laminated nanosheets and the tribofilm on the rubbing surfaces.
Skip Nav Destination
Article navigation
July 2019
Research-Article
Boundary Lubricating Properties of Black Phosphorus Nanosheets in Polyalphaolefin Oil
Yufu Xu,
Yufu Xu
1
Institute of Tribology,
School of Mechanical Engineering,
Hefei 230009,
e-mail: xuyufu@hfut.edu.cn
School of Mechanical Engineering,
Hefei University of Technology
,Hefei 230009,
China
e-mail: xuyufu@hfut.edu.cn
1Corresponding author.
Search for other works by this author on:
Jingyuan Yu,
Jingyuan Yu
Institute of Tribology,
School of Mechanical Engineering,
Hefei 230009,
e-mail: yujingyua_n@126.com
School of Mechanical Engineering,
Hefei University of Technology
,Hefei 230009,
China
e-mail: yujingyua_n@126.com
Search for other works by this author on:
Yinghui Dong,
Yinghui Dong
Department of Mechanical Design Engineering, School of Mechanical Engineering,
Hefei 230009,
e-mail: dongyinghui@hfut.edu.cn
Hefei University of Technology
,Hefei 230009,
China
e-mail: dongyinghui@hfut.edu.cn
Search for other works by this author on:
Tao You,
Tao You
Institute of Tribology,
School of Mechanical Engineering,
Hefei 230009,
e-mail: mcsyt@126.com
School of Mechanical Engineering,
Hefei University of Technology
,Hefei 230009,
China
e-mail: mcsyt@126.com
Search for other works by this author on:
Xianguo Hu
Xianguo Hu
Institute of Tribology,
School of Mechanical Engineering,
Hefei 230009,
e-mail: xghu@hfut.edu.cn
School of Mechanical Engineering,
Hefei University of Technology
,Hefei 230009,
China
e-mail: xghu@hfut.edu.cn
Search for other works by this author on:
Yufu Xu
Institute of Tribology,
School of Mechanical Engineering,
Hefei 230009,
e-mail: xuyufu@hfut.edu.cn
School of Mechanical Engineering,
Hefei University of Technology
,Hefei 230009,
China
e-mail: xuyufu@hfut.edu.cn
Jingyuan Yu
Institute of Tribology,
School of Mechanical Engineering,
Hefei 230009,
e-mail: yujingyua_n@126.com
School of Mechanical Engineering,
Hefei University of Technology
,Hefei 230009,
China
e-mail: yujingyua_n@126.com
Yinghui Dong
Department of Mechanical Design Engineering, School of Mechanical Engineering,
Hefei 230009,
e-mail: dongyinghui@hfut.edu.cn
Hefei University of Technology
,Hefei 230009,
China
e-mail: dongyinghui@hfut.edu.cn
Tao You
Institute of Tribology,
School of Mechanical Engineering,
Hefei 230009,
e-mail: mcsyt@126.com
School of Mechanical Engineering,
Hefei University of Technology
,Hefei 230009,
China
e-mail: mcsyt@126.com
Xianguo Hu
Institute of Tribology,
School of Mechanical Engineering,
Hefei 230009,
e-mail: xghu@hfut.edu.cn
School of Mechanical Engineering,
Hefei University of Technology
,Hefei 230009,
China
e-mail: xghu@hfut.edu.cn
1Corresponding author.
Contributed by the Tribology Division of ASME for publication in the Journal of Tribology. Manuscript received July 16, 2018; final manuscript received April 13, 2019; published online May 15, 2019. Assoc. Editor: Yonggang Meng.
J. Tribol. Jul 2019, 141(7): 072101 (10 pages)
Published Online: May 15, 2019
Article history
Received:
July 16, 2018
Revision Received:
April 13, 2019
Accepted:
April 13, 2019
Connected Content
Citation
Xu, Y., Yu, J., Dong, Y., You, T., and Hu, X. (May 15, 2019). "Boundary Lubricating Properties of Black Phosphorus Nanosheets in Polyalphaolefin Oil." ASME. J. Tribol. July 2019; 141(7): 072101. https://doi.org/10.1115/1.4043598
Download citation file:
Get Email Alerts
Related Articles
Understanding the Role of Directional Texture in Tribofilm Evolution
J. Tribol (December,2022)
Tribochemical Interactions of Friction Modifier and Antiwear Additives With CrN Coating Under Boundary Lubrication Conditions
J. Tribol (October,2008)
Related Proceedings Papers
Related Chapters
Wear and Contact Fatigue Properties of a Novel Lubricant Additive
Bearing and Transmission Steels Technology
Contact Laws
Contact in Structural Mechanics: A Weighted Residual Approach
Tribology-by-Design for Bearing and Gear Steel Tribology
Bearing and Transmission Steels Technology