Skip Nav Destination
Issues
April 2006
ISSN 0742-4787
EISSN 1528-8897
In this Issue
Research Papers
A New Method for Elastic-Plastic Contact Analysis of a Deformable Sphere and a Rigid Flat
J. Tribol. April 2006, 128(2): 221–229.
doi: https://doi.org/10.1115/1.2164469
Topics:
Deformation
,
Pressure
,
Simulation
,
Stress
,
Errors
,
Finite element methods
,
Finite element analysis
,
Computer software
,
Metals
Experimental Investigation of Fully Plastic Contact of a Sphere Against a Hard Flat
J. Tribol. April 2006, 128(2): 230–235.
doi: https://doi.org/10.1115/1.2164470
Topics:
Aluminum
,
Deformation
,
Pressure
,
Stress
,
Plasticity
Elastic-Plastic Contact Between Rough Surfaces: Proposal for a Wear or Running-In Model
J. Tribol. April 2006, 128(2): 236–244.
doi: https://doi.org/10.1115/1.2163360
Topics:
Plasticity
,
Stress
,
Surface roughness
,
Wear
,
Cycles
,
Pressure
,
Algorithms
Elastic-Plastic Contact Behavior Considering Asperity Interactions for Surfaces With Various Height Distributions
J. Tribol. April 2006, 128(2): 245–251.
doi: https://doi.org/10.1115/1.2162557
Topics:
Deformation
,
Plasticity
,
Separation (Technology)
,
Stress
,
Surface roughness
Vibration Response of Rolling Element Bearings in a Rotor Bearing System to a Local Defect Under Radial Load
J. Tribol. April 2006, 128(2): 252–261.
doi: https://doi.org/10.1115/1.2164467
Topics:
Bearings
,
Excitation
,
Rolling bearings
,
Rotors
,
Stress
,
Vibration
,
Spectra (Spectroscopy)
Performance Evaluation of Innovative Micro-Traction-Drive-Utilized Angular-Contact Bearing
J. Tribol. April 2006, 128(2): 262–266.
doi: https://doi.org/10.1115/1.2162177
Theoretical and Experimental Investigations Into Spacing Characteristics Between Roller and Three Types of Webs With Different Permeabilities
J. Tribol. April 2006, 128(2): 267–274.
doi: https://doi.org/10.1115/1.2164463
Topics:
Film thickness
,
Permeability
,
Rollers
,
Tension
In Vitro Study of Backside Wear Mechanisms on Mobile Knee-Bearing Components
J. Tribol. April 2006, 128(2): 275–281.
doi: https://doi.org/10.1115/1.2162916
Topics:
Bearings
,
Bone
,
Cements (Adhesives)
,
Knee
,
Particulate matter
,
Wear
,
Cycles
,
Coating processes
,
Coatings
,
Testing
Thermal and Non-Newtonian Numerical Analyses for Starved EHL Line Contacts
J. Tribol. April 2006, 128(2): 282–290.
doi: https://doi.org/10.1115/1.2164465
Topics:
Film thickness
,
Lubricants
,
Numerical analysis
,
Pressure
,
Temperature
,
Traction
,
Leakage
,
Fluids
,
Viscosity
,
Stress
An Efficient Algorithm for Fluid Force and its Jacobian Matrix in Journal Bearing
J. Tribol. April 2006, 128(2): 291–295.
doi: https://doi.org/10.1115/1.2162559
Topics:
Algorithms
,
Fluids
,
Jacobian matrices
,
Journal bearings
,
Bearings
Lubricating Properties of Water in Oil Emulsions
J. Tribol. April 2006, 128(2): 296–311.
doi: https://doi.org/10.1115/1.2164464
Topics:
Emulsions
,
Film thickness
,
Stress
,
Water
,
Computer simulation
,
Friction
,
Lubricants
,
Steel
,
Pressure
Thermohydrodynamic Behavior of a Slider Pocket Bearing
J. Tribol. April 2006, 128(2): 312–318.
doi: https://doi.org/10.1115/1.2162914
Topics:
Bearings
,
Temperature
,
Pressure
,
Lubricants
,
Thermohydrodynamics
,
Film thickness
,
Flow (Dynamics)
,
Stress
,
Geometry
,
Finite volume methods
Influence of Inlet Oil Temperature on the Instability Threshold of Rotor-Bearing Systems
J. Tribol. April 2006, 128(2): 319–326.
doi: https://doi.org/10.1115/1.2162920
Topics:
Bearings
,
Rotors
,
Temperature
,
Vibration
Design of Optimized Opposed Slider Air Bearings for High-Speed Recording on a Metal Foil Disk
J. Tribol. April 2006, 128(2): 327–334.
doi: https://doi.org/10.1115/1.2162917
Topics:
Air bearings
,
Disks
,
Metal foil
,
Stiffness
,
Shock (Mechanics)
,
Storage
,
Design
,
Etching
,
Pressure
Finite Element Analysis of the Coupled Journal and Thrust Bearing in a Computer Hard Disk Drive
J. Tribol. April 2006, 128(2): 335–340.
doi: https://doi.org/10.1115/1.2162918
The Use of System Identification Methods to Evaluate the Effects of Slider-Disk Contacts and Disk Micro-Waviness on the Flying Height Modulations
J. Tribol. April 2006, 128(2): 341–344.
doi: https://doi.org/10.1115/1.2162551
Topics:
Disks
,
Magnetic recording
The Validity of the Reynolds Equation in Modeling Hydrostatic Effects in Gas Lubricated Textured Parallel Surfaces
J. Tribol. April 2006, 128(2): 345–350.
doi: https://doi.org/10.1115/1.2148419
Characteristics of Powder Lubricated Finite-Width Journal Bearings: A Hydrodynamic Analysis
J. Tribol. April 2006, 128(2): 351–357.
doi: https://doi.org/10.1115/1.2162558
Topics:
Bearings
,
Collisions (Physics)
,
Elasticity
,
Flow (Dynamics)
,
Friction
,
Journal bearings
,
Lubrication
,
Particle size
,
Stress
,
Pressure
A Lattice-Based Cellular Automata Modeling Approach for Granular Flow Lubrication
J. Tribol. April 2006, 128(2): 358–364.
doi: https://doi.org/10.1115/1.2164466
Experimental Study of a Squeeze Film Damper With Eccentric Circular Orbits
J. Tribol. April 2006, 128(2): 365–377.
doi: https://doi.org/10.1115/1.2162555
Topics:
Bearings
,
Cavitation
,
Dampers
,
Pressure
,
Signals
,
Rupture
,
Vapors
,
Sensors
,
Waves
,
Air entrainment
Rotordynamic-Coefficients and Static (Equilibrium Loci and Leakage) Characteristics for Short, Laminar-flow Annular Seals
J. Tribol. April 2006, 128(2): 378–387.
doi: https://doi.org/10.1115/1.2164468
Topics:
Compressors
,
Damping
,
Equilibrium (Physics)
,
Flow (Dynamics)
,
Laminar flow
,
Leakage
,
Pressure
,
Rotors
,
Stiffness
,
Stress
Frequency Dependency of Measured and Predicted Rotordynamic Coefficients for a Load-On-Pad Flexible-Pivot Tilting-Pad Bearing
J. Tribol. April 2006, 128(2): 388–395.
doi: https://doi.org/10.1115/1.2162552
Topics:
Bearings
,
Stiffness
,
Stress
,
Excitation
,
Damping
,
Flow (Dynamics)
Numerical Modelling of High Pressure Gas Face Seals
J. Tribol. April 2006, 128(2): 396–405.
doi: https://doi.org/10.1115/1.2164471
Topics:
Flow (Dynamics)
,
Fluids
,
High pressure (Physics)
,
Pressure
,
Temperature
,
Inertia (Mechanics)
,
Boundary-value problems
,
Modeling
Optimization of the Cross Section of an Elastomeric Seal for Pneumatic Cylinders
J. Tribol. April 2006, 128(2): 406–413.
doi: https://doi.org/10.1115/1.2162915
Topics:
Cylinders
,
Friction
,
Geometry
,
Pistons
,
Pneumatic cylinders
,
Pressure
,
Stress
,
Finite element analysis
,
Optimization
,
Sealing (Process)
Global Analysis Method of Friction Parameters in Strip-Drawing Tests
J. Tribol. April 2006, 128(2): 414–421.
doi: https://doi.org/10.1115/1.2162919
Topics:
Aluminum
,
Delays
,
Friction
,
Modeling
,
Strips
,
Transfer functions
,
Steel sheet
,
Lubrication
,
Machinery
,
Stress
Modeling and Parametric Study of Torque in Open Clutch Plates
J. Tribol. April 2006, 128(2): 422–430.
doi: https://doi.org/10.1115/1.2162553
Topics:
Clearances (Engineering)
,
Drag (Fluid dynamics)
,
Flow (Dynamics)
,
Plates (structures)
,
Pressure
,
Simulation
,
Torque
,
Modeling
,
Shear stress
,
Disks
Technical Briefs
An Approximate Analytical Model for the Separation of a Sphere From a Flat in the Presence of a Liquid
J. Tribol. April 2006, 128(2): 431–435.
doi: https://doi.org/10.1115/1.2162556
Topics:
Separation (Technology)
,
Inertia (Mechanics)
,
Viscosity
Bio-Ferrography to Capture and Separate Polyethylene Wear Debris from Hip Simulator Fluid and Compared with Conventional Filter Method
J. Tribol. April 2006, 128(2): 436–441.
doi: https://doi.org/10.1115/1.2162554
Topics:
Filters
,
Fluids
,
Particulate matter
,
Wear
Erratum
Erratum: “Elastic-Plastic Finite Element Analysis of Nonsteady State Partial Slip Wheel-Rail Rolling Contact” [Journal of Tribology, 2005, 127(4), pp. 713–721]
J. Tribol. April 2006, 128(2): 442.
doi: https://doi.org/10.1115/1.2173641
Topics:
Finite element analysis
,
Rails
,
Rolling contact
,
Tribology
,
Wheels
,
Elastoplasticity
,
Rolling friction