Skip Nav Destination
Issues
May 2017
ISSN 0742-4787
EISSN 1528-8897
Research Papers
Applications
Optimization of Axially Magnetized Stack Structured Permanent Magnet Thrust Bearing Using Three-Dimensional Mathematical Model
J. Tribol. May 2017, 139(3): 031101.
doi: https://doi.org/10.1115/1.4034533
Topics:
Optimization
,
Permanent magnets
,
Stiffness
,
Thrust bearings
,
Design
,
Bearings
Analysis of Surface Temperatures Within Heat Flux Bands During Constant Acceleration Including Deceleration to Halt
J. Tribol. May 2017, 139(3): 031102.
doi: https://doi.org/10.1115/1.4034532
Topics:
Temperature
,
Heat flux
,
Steady state
Sticking of a Linear-Guideway Type Recirculating Ball Bearing
J. Tribol. May 2017, 139(3): 031103.
doi: https://doi.org/10.1115/1.4034961
Topics:
Ball bearings
,
Bearings
,
Stress
,
Friction
,
Railroad passenger cars
,
Sliding friction
Coatings and Solid Lubricants
Tribological Behavior of Diamondlike Carbon Film-Deposited Ti6Al4V Alloy Swinging Against Ultrahigh Molecular Weight Polyethylene in Fetal Bovine Serum
J. Tribol. May 2017, 139(3): 031301.
doi: https://doi.org/10.1115/1.4034077
Topics:
Alloys
,
Carbon
,
Diamond films
,
Friction
,
Stress
,
Wear
,
Displacement
,
Tribology
,
Artificial joints
,
Damage
General Procedure for Selecting and Testing Materials and Coatings in Response to a Tribological Problem
J. Tribol. May 2017, 139(3): 031302.
doi: https://doi.org/10.1115/1.4034331
Topics:
Coatings
,
Friction
,
Tribology
,
Wear
,
Temperature
,
Coating processes
Effect of Flow Velocity and Impact Angle on Erosion–Corrosion Behavior of Chromium Carbide Coating
J. Tribol. May 2017, 139(3): 031303.
doi: https://doi.org/10.1115/1.4034424
Contact Mechanics
A Model of Capillary-Driven Flow Between Contacting Rough Surfaces
J. Tribol. May 2017, 139(3): 031401.
doi: https://doi.org/10.1115/1.4034211
Topics:
Flow (Dynamics)
,
Liquid films
,
Pressure
,
Stress
,
Surface roughness
,
Lubrication
,
Film thickness
,
Deformation
Spectral Approach on Multiscale Roughness Characterization of Nominally Rough Surfaces
J. Tribol. May 2017, 139(3): 031402.
doi: https://doi.org/10.1115/1.4034215
Topics:
Surface roughness
,
Fractals
,
Spectral energy distribution
The Effect Analysis of Contact Stiffness on Wear of Clearance Joint
J. Tribol. May 2017, 139(3): 031403.
doi: https://doi.org/10.1115/1.4034529
Topics:
Clearances (Engineering)
,
Stiffness
,
Wear
,
Pressure
On Pastewka and Robbins' Criterion for Macroscopic Adhesion of Rough Surfaces
J. Tribol. May 2017, 139(3): 031404.
doi: https://doi.org/10.1115/1.4034530
Topics:
Adhesion
,
Surface roughness
,
Stress
,
Wavelength
Elastohydrodynamic Lubrication
Elastohydrodynamic Lubrication Analysis of Finite Line Contact Problem With Consideration of Two Free End Surfaces
J. Tribol. May 2017, 139(3): 031501.
doi: https://doi.org/10.1115/1.4034248
Topics:
Film thickness
,
Pressure
,
Rollers
,
Stress
,
Elastohydrodynamic lubrication
,
Contact mechanics
Effect of Kinematic Operating Conditions on Ridge Deformation—Numerical Study With Experimental Comparison
J. Tribol. May 2017, 139(3): 031502.
doi: https://doi.org/10.1115/1.4034764
Topics:
Deformation
,
Engineering simulation
,
Film thickness
,
Kinematics
,
Pressure
,
Rheology
,
Simulation
,
Surface roughness
,
Lubricants
,
Computer simulation
A Theoretical Tribological Comparison Between Soft and Hard Coatings of Spur Gear Pairs
J. Tribol. May 2017, 139(3): 031503.
doi: https://doi.org/10.1115/1.4035028
Topics:
Coatings
,
Friction
,
Temperature
,
Pressure
,
Coating processes
,
Film thickness
,
Stress
,
Spur gears
Friction and Wear
Study on the Friction and Wear Characteristics of Tungsten Carbide and Zirconium With Phosphor-Containing Liquid
J. Tribol. May 2017, 139(3): 031601.
doi: https://doi.org/10.1115/1.4034022
Topics:
Friction
,
Particulate matter
,
Phosphors
,
Wear
,
Zirconium
,
Lubrication
,
Tungsten
,
Surface roughness
The Influence of Load and Angular Displacement Amplitude on the Torsional Fretting Wear of a Ball-on-Socket Cervical Disk Model
J. Tribol. May 2017, 139(3): 031602.
doi: https://doi.org/10.1115/1.4034246
Topics:
Damage
,
Displacement
,
Stress
,
Wear
,
Disks
Wear Characteristics of Conventional and Squeeze-Film Artificial Hip Joints
J. Tribol. May 2017, 139(3): 031603.
doi: https://doi.org/10.1115/1.4034528
Hydrodynamic Lubrication
Effect of Groove Textures on the Performances of Gaseous Bubble in the Lubricant of Journal Bearing
J. Tribol. May 2017, 139(3): 031701.
doi: https://doi.org/10.1115/1.4034247
Topics:
Bubbles
,
Lubricants
,
Pressure
,
Temperature
,
Bearings
,
Journal bearings
On the Controllability and Observability of Actively Lubricated Journal Bearings With Pads Featuring Different Nozzle-Pivot Configurations
J. Tribol. May 2017, 139(3): 031702.
doi: https://doi.org/10.1115/1.4033053
Topics:
Bearings
,
Nozzles
,
Stress
,
Lubrication
A Robust Modification to the Universal Cavitation Algorithm in Journal Bearings
J. Tribol. May 2017, 139(3): 031703.
doi: https://doi.org/10.1115/1.4034244
Topics:
Algorithms
,
Bulk modulus
,
Cavitation
,
Journal bearings
,
Pressure
,
Lubricants
Dynamic Characteristics of Spiral-Grooved Opposed-Hemisphere Gas Bearings
J. Tribol. May 2017, 139(3): 031704.
doi: https://doi.org/10.1115/1.4034423
Topics:
Bearings
,
Damping
,
Gas bearings
,
Rotors
,
Stiffness
,
Degrees of freedom
,
Stability
,
Pressure
Design Optimization of Gas Foil Thrust Bearings for Maximum Load Capacity
J. Tribol. May 2017, 139(3): 031705.
doi: https://doi.org/10.1115/1.4034616
Topics:
Bearings
,
Film thickness
,
Rotors
,
Stress
,
Thrust bearings
,
Pressure
Tribochemistry and Tribofilms
Characterization of Cavitation Eroded Surfaces at Different Temperatures Using Wavelet Method
J. Tribol. May 2017, 139(3): 032301.
doi: https://doi.org/10.1115/1.4034381
Topics:
Cavitation
,
Cavitation erosion
,
Particulate matter
,
Temperature
,
Wavelets
,
Particle size
,
Erosion
Technical Brief
Characterization of Friction Condition Transition by Phase Space Trajectories
J. Tribol. May 2017, 139(3): 034501.
doi: https://doi.org/10.1115/1.4034206
Topics:
Friction
,
Phase space
,
Cylinders
,
Wear
Effects of Viscoelastic Properties of Friction Lining Materials on Their Friction Coefficients
J. Tribol. May 2017, 139(3): 034502.
doi: https://doi.org/10.1115/1.4034380
Topics:
Friction
,
Stress
,
Viscoelasticity
,
Relaxation (Physics)
,
Creep
Equivalent Clearance Model for Solving Thermohydrodynamic Lubrication of Slider Bearings With Steps
J. Tribol. May 2017, 139(3): 034503.
doi: https://doi.org/10.1115/1.4034457
Topics:
Bearings
,
Clearances (Engineering)
,
Lubrication
,
Pressure
,
Thermohydrodynamics
,
Temperature
,
Temperature distribution
,
Fluids
,
Simulation
,
Slider bearings
Wear Characteristics of Medical Hearing-Aid Components and Friction Reduction Mechanisms
J. Tribol. May 2017, 139(3): 034504.
doi: https://doi.org/10.1115/1.4034534
Topics:
Wear
,
Texture (Materials)
,
Batteries
,
Biomedicine
,
Friction
Discussion
Discussion: “A New Approach for Fatigue Damage Modeling of Subsurface-Initiated Spalling in Large Rolling Contacts” (Walvekar, A. A., Paulson, N., Sadeghi, F., Weinzapfel, N., Correns, M., and Dinkel, M., 2016, ASME J. Tribol. 139(1), p. 011101)
J. Tribol. May 2017, 139(3): 035501.
doi: https://doi.org/10.1115/1.4034637
Topics:
Bearings
,
Contact mechanics
,
Elastohydrodynamic lubrication
,
Fatigue damage
,
Modeling
,
Steel
,
Stress
,
Fatigue
Closure
Closure to “Discussion of ‘A New Approach for Fatigue Damage Modeling of Subsurface-Initiated Spalling in Large Rolling Contacts’” (2016, ASME J. Tribol., 139(3), p. 035501)
J. Tribol. May 2017, 139(3): 036001.
doi: https://doi.org/10.1115/1.4034638
Topics:
Fatigue
,
Fatigue damage
,
Modeling
,
Stress
,
Damage
,
Rolling contact
,
Torsion