...Zhaoming Yin; Zhimin Fan To slow down the surface wear process of double involute gears (DIG), the surface adhesive wear model and wear life prediction model are established according to its meshing characteristics, combined with the modified Archard wear model and mixed elastohydrodynamic...

... , A. , and Méndez-Díaz , S. , 2013 , “ Dry Sliding Wear of Gradient Al Ni/SiC Composites ,” Wear , 301 ( 1–2 ), pp. 688 – 694 . 10.1016/j.wear.2012.11.052 [13] Ipek , R. , 2005 , “ Adhesive Wear Behaviour of B4C and SiC Reinforced 4147 Al Matrix Composites (Al/B4C–Al/SiC) ,” J. Mater. Process...

..., crack branching and crack aggregation during contact loading are simulated, and the formation process of sheet-like wear particles is clarified. It is demonstrated that the subsurface micro-cracks, particularly those near inclusions, and their subsequent evolution play a major role in the adhesive wear...

... nanocomposite WC DCT dry sliding wear adhesive wear The driven factors to introduce new materials in automotive and aviation sectors are cost, fuel economy, environment (emissions), performance, and recyclability [ 1 ]. Low-density materials can significantly contribute to enhance the fuel economy...

... received June 22, 2018; final manuscript received October 4, 2018; published online November 21, 2018. Assoc. Editor: Xiaolei Wang. 22 06 2018 04 10 2018 metal matrix composite severe plastic deformation high-temperature wear mechanism adhesive wear delamination Aluminum...

... to the improvements in microhardness and strength. For the as-received specimen, the strong adhesive wear leads to the maximum wear rate compared with the cold rolled specimens. Under higher rolling strain conditions, the grain boundary embrittlement caused by oxygen reaction leads to the formation of oxidative...

... stainless steel welding galling adhesive wear galling resistance The ASTM G98 standard test method for galling resistance of materials ( 11 ), often referred to as the “button-on-block” test, is the most widely used galling test method. It has been used for several decades to rank galling...

... steel stochastic processes wear resistance galling adhesive wear galling resistance Galling is a severe form of adhesive wear, described by the ASTM ( 1 ) as “a form of surface damage arising between sliding solids, distinguished by macroscopic, usually localized, roughening...

... Calculation in Spur Gears,” ASME J. Tribol., 115, pp. 493–500) to predict the steady state adhesive wear in gears. Thermal effects are included using a simplified thermoelastohydrodynamic analysis. The prediction of the model is verified by comparing simulation results with published experimental data...

... Composite Reinforced With Alumina Particles ,” J. Mater. Process. Technol. 0924-0136 , 162–163 , pp. 138 – 148 . Yang , L. J. , 2004 , “ Prediction of Steady-State Wear Coefficients in Adhesive Wear ,” STLE Tribol. Trans. 1040-2004 , 47 , pp. 335 – 340 . Yang , L. J. , 1999...