... 03 2021 18 05 2021 18 05 2021 07 06 2021 non-ferrous metals (Zn–40Al–2Cu–2Si alloy) bearing materials wear behavior sliding friction bearings hardness wear mechanisms The first Zn-based commercial alloys produced in the late 1920s are called ZAMAK 2, 3, 5, and 7...

... and prepared by powder metallurgy, was used as a potential material. Pin-on-disk wear tests were conducted to measure the sliding friction of the Cu–Ni–graphite composite against U75 V steel. The results showed that the friction coefficients gradually decreased when the graphite content in the composite ranged...

...), A is the area of the specimen (196 mm 2 ), d 1 is the average thickness of the specimen before the experiment (mm), d 2 is the average thickness of specimen after the experiment (mm), and f a is the automatically obtained average force of sliding friction ( N ) from the test rig. They were obtained...

... )]. c Reference [( 30 )]. 27 12 2010 02 09 2011 19 10 2011 19 10 2011 amorphous semiconductors carbon cyclotron resonance finite element analysis scanning electron microscopy shear strength silicon compounds sliding friction wear X-ray chemical analysis...

... alloys cobalt alloys molecular biophysics molecular weight polymers proteins sliding friction stainless steel surface roughness wear articular cartilage biomaterials friction hemiarthroplasty wear Nonbiological materials are commonly used in contact with native articular...

... effects are discovered, which are different from traditional macroscopic phenomena. 19 07 2010 25 06 2011 06 10 2011 06 10 2011 adhesion continuum mechanics finite element analysis indentation mechanical contact molecular dynamics method sliding friction surface texture...

... 07 2011 28 07 2011 cellular automata cooling design of experiments inverse problems mechanical contact parameter estimation sensor placement sliding friction This introduction will briefly cover the motivations for the work presented, the major objectives, and the previous...

... for the tribological test machine. 11 10 2010 07 03 2011 21 07 2011 21 07 2011 cooling copper heat exchangers heat transfer lubrication mechanical contact microchannel flow sliding friction steel wear wear testing bearing design and technology friction sliding...

... to be responsible for the decreased oil absorption and pore plugging of the friction material surface. 30 03 2010 22 12 2010 22 03 2011 22 03 2011 clutches detergents lubricating oils mechanical contact sliding friction steel friction ATF antishudder Passenger car...

... . 10.1016/S0301-679X(02)00040-3 06 05 2010 18 12 2010 17 03 2011 17 03 2011 abrasion austenitic steel plastic deformation rails railways sliding friction pearlite bainite austenite ferrite sliding wear adhesion third-body abrasion mild oxidation...

... be observed, which reveal that microadhesions could exist. 22 03 2010 18 11 2010 21 12 2010 21 12 2010 adhesion carbon steel deep drawing galvanising high-pressure effects lubrication mechanical contact sliding friction flat friction electrogalvanized steel mixed...

... crystal microstructure fatigue microhardness plastic deformation scanning electron microscopy sliding friction surface alloying wear resistance X-ray diffraction zirconium compounds coatings sliding surface treatment wear mechanisms Titanium and titanium alloys have been widely...

.... , 2000 , “ Experimental Characterization of Sliding Friction: Crossing From Deformation to Plowing Contact ,” ASME J. Tribol. 0742-4787 , 122 ( 4 ), pp. 856 – 863 . 10.1115/1.1286217 Menezes , P. L. , Kishore , and Kailas , S. V. , 2008 , “ Effect of Surface Topography...

... back soon and prevent the tumbling quickly. 03 03 2010 03 08 2010 08 10 2010 08 10 2010 numerical analysis sliding friction surface roughness inclined contact angular displacement friction The contact of two solid surfaces plays a significant role...

... low-temperature techniques machine bearings mechanical contact sliding friction steel thermal conductivity titanium cryogenic wear titanium copper flash temperature It is well recognized that the tribological response of a metal depends on the intrinsic material properties...

... sliding friction suspensions wear cast iron sliding wear behavior solid lubricants oil lubricant material removal mechanisms Cast irons are widely used as tribocomponents experiencing sliding conditions in the presence of externally applied lubricants, such as oil and grease ( 1 2 3...

... and magnitude. The effect of running-in on the Stribeck curve for different surface pattern is discussed. desorption Gaussian distribution lubrication plastic deformation rolling friction sliding friction surface roughness running-in breaking-in Stribeck curve surface roughness pattern mixed...

... with Pearson distribution and experimental results under different running-in conditions 20 11 2009 16 03 2010 15 06 2010 rough surfaces sliding friction stiction surface roughness static friction coefficient friction model surface roughness asymmetric height...

..., but as a function of the test materials process history as well. 07 05 2009 26 01 2010 26 04 2010 26 04 2010 abrasion adhesion chromium alloys iron alloys molybdenum alloys nickel alloys niobium alloys oxidation sliding friction friction wear Inconels abrasion...

... contact plasticity sliding friction slip spherical contact presliding static friction junction growth contact condition In 1938 Cattaneo ( 1 ) and then in 1949 Mindlin ( 2 ) published their seminal works on the effect of forces tangential to the interface of elastic bodies in contact...