Skip Nav Destination
Issues
May 2020
ISSN 0889-504X
EISSN 1528-8900
In this Issue
Research Papers
Influence of Excitation Frequency, Phase Shift, and Duty Cycle on Cooling Ratio in a Dynamically Forced Impingement Jet Array
J. Turbomach. May 2020, 142(5): 051001.
doi: https://doi.org/10.1115/1.4046616
Topics:
Cooling
,
Cycles
,
Excitation
,
Nozzles
,
Phase shift
,
Reynolds number
Analysis of the Thermomechanical Stresses in Double-Wall Effusion Cooled Systems
J. Turbomach. May 2020, 142(5): 051002.
doi: https://doi.org/10.1115/1.4046268
Uncertainty Propagation Analyses of Lean Burn Combustor Exit Conditions for a Robust Nozzle Cooling Design
J. Turbomach. May 2020, 142(5): 051003.
doi: https://doi.org/10.1115/1.4046421
Description of the Flow in a Two-Stage Low-Pressure Turbine With Hub Cavities
J. Turbomach. May 2020, 142(5): 051004.
doi: https://doi.org/10.1115/1.4046422
Validation Studies of Linear Oscillating Compressor Cascade and Use of Influence Coefficient Method
J. Turbomach. May 2020, 142(5): 051005.
doi: https://doi.org/10.1115/1.4045657
Topics:
Blades
,
Cascades (Fluid dynamics)
,
Clearances (Engineering)
,
Damping
,
Pressure
,
Suction
,
Boundary layers
,
Flow (Dynamics)
,
Compressors
,
Turbulence
Effect of Non-Axisymmetric Endwall Profiling on Heat Transfer and Film Cooling Effectiveness of a Transonic Rotor Blade
J. Turbomach. May 2020, 142(5): 051006.
doi: https://doi.org/10.1115/1.4046448
Topics:
Blades
,
Cooling
,
Film cooling
,
Heat transfer
,
Pressure
,
Flow (Dynamics)
,
Cascades (Fluid dynamics)
,
Corners (Structural elements)
Effect of Additive Manufacturing Process Parameters on Turbine Cooling
J. Turbomach. May 2020, 142(5): 051007.
doi: https://doi.org/10.1115/1.4046459
Topics:
Cooling
,
Film cooling
,
Surface roughness
,
Turbines
A Computational Technique to Evaluate the Relative Influence of Internal and External Cooling on Overall Effectiveness
J. Turbomach. May 2020, 142(5): 051008.
doi: https://doi.org/10.1115/1.4045987
Topics:
Cooling
,
Film cooling
,
Coolants
Performance of Public Film Cooling Geometries Produced Through Additive Manufacturing
J. Turbomach. May 2020, 142(5): 051009.
doi: https://doi.org/10.1115/1.4046488
Topics:
Cooling
,
Film cooling
,
Coolants
,
Flow (Dynamics)
,
Geometry
,
Additive manufacturing
Predicting the Operability of Damaged Compressors Using Machine Learning
J. Turbomach. May 2020, 142(5): 051010.
doi: https://doi.org/10.1115/1.4046658
Topics:
Artificial neural networks
,
Blades
,
Compressors
,
Damage
,
Machine learning
,
Pressure
,
Parametrization
