A “flex circuit” is a laminate of polyimide substrate, adhesive, and copper conductors that is used to connect the stationary electronic components in a computer hard disk drive to the rotating arm that positions read/write heads above the disks. The flex circuit’s transverse and longitudinal vibrations couple with the arm, and those motions, although seemingly small, degrade performance during seek operations from one data track to another. The flex circuit and arm mechanism is defined by a number of geometric parameters, and some latitude is available at the design stage for choosing dimensions and angles so as to minimize vibration transmission from the flex circuit to the arm. In this paper, the results of parameter, optimization, and experimental studies are discussed with a view toward improving isolation of the arm from vibration of the flex circuit in one or several modes. Particularly for the mechanism’s odd modes, the flex circuit’s free length and the relative attachment angle between the arm’s centerline and the circuit can each be chosen to significantly reduce vibration transmission. A genetic algorithm was applied to minimize a metric of vibration coupling in several vibration modes, and, in the case study examined, vibration isolation was improved by over 80%.
Skip Nav Destination
Article navigation
April 2005
Technical Papers
Optimizing Vibration Isolation of Flex Circuits in Hard Disk Drives
M. R. Brake,
M. R. Brake
Student Member
Department of Mechanical Engineering, Data Storage Systems Center,
Carnegie Mellon University
, Pittsburgh, PA 15213
Search for other works by this author on:
J. A. Wickert
J. A. Wickert
Fellow
Department of Mechanical Engineering, Data Storage Systems Center,
Carnegie Mellon University
, Pittsburgh, PA 15213
Search for other works by this author on:
M. R. Brake
Student Member
Department of Mechanical Engineering, Data Storage Systems Center,
Carnegie Mellon University
, Pittsburgh, PA 15213
J. A. Wickert
Fellow
Department of Mechanical Engineering, Data Storage Systems Center,
Carnegie Mellon University
, Pittsburgh, PA 15213J. Vib. Acoust. Apr 2005, 127(2): 165-172 (8 pages)
Published Online: June 3, 2004
Article history
Received:
May 30, 2003
Revised:
June 3, 2004
Citation
Brake, M. R., and Wickert, J. A. (June 3, 2004). "Optimizing Vibration Isolation of Flex Circuits in Hard Disk Drives." ASME. J. Vib. Acoust. April 2005; 127(2): 165–172. https://doi.org/10.1115/1.1891813
Download citation file:
Get Email Alerts
Related Articles
An Active Microvibration Isolation System for Hi-tech Manufacturing Facilities
J. Vib. Acoust (April,2001)
Closure to “Discussion of ‘Optimum Design of Vibration Absorbers for Structurally Damped Timoshenko Beams,’ ” (1998, ASME J. Vib. Acoust., 120 , pp. 833–841)
J. Vib. Acoust (October,2001)
Recent Advances in Shock Vibration Isolation: An Overview and Future Possibilities
Appl. Mech. Rev (November,2019)
Design and Experimental Analysis of Origami-Inspired Vibration Isolator With Quasi-Zero-Stiffness Characteristic
J. Vib. Acoust (October,2017)
Related Proceedings Papers
Related Chapters
Dynamic Properties of Vibration Isolation Systems
Passive Vibration Isolation
Principles and Criteria of Vibration Isolation
Passive Vibration Isolation
Passive Vibration Isolation Means
Passive Vibration Isolation