Laser Doppler vibrometry is now a well established technique enabling noncontact vibration measurements in the most challenging of environments. Rotor vibration measurements are often highlighted as a major application of laser vibrometers due to their noncontact operation and inherent immunity to shaft runout. In such measurements, resolution of the individual axial and torsional vibration components is possible via particular arrangement of the laser beam(s). Resolution of the radial or pitch/yaw vibration components, however, can only be achieved by essential post-processing of the data from simultaneous orthogonal measurements. This paper describes the principle and rigorous examination of a novel, dedicated resolution algorithm enabling, for the first time, real-time post-processing of the outputs from standard commercial instruments. The system performed well, even in the presence of noise and other typical measurement errors, and was implemented successfully in an engine vibration study.
Skip Nav Destination
e-mail: s.j.rothberg@lboro.ac.uk
Article navigation
February 2006
Technical Papers
Rotor Vibration Measurements Using Laser Doppler Vibrometry: Essential Post-Processing for Resolution of Radial and Pitch/Yaw Vibrations
Ben J. Halkon,
Ben J. Halkon
Wolfson School of Mechanical and Manufacturing Engineering,
Loughborough University
, Loughborough, Leicestershire, LE11 3TU, UK
Search for other works by this author on:
Steve J. Rothberg
Steve J. Rothberg
Wolfson School of Mechanical and Manufacturing Engineering,
e-mail: s.j.rothberg@lboro.ac.uk
Loughborough University
, Loughborough, Leicestershire, LE11 3TU, UK
Search for other works by this author on:
Ben J. Halkon
Wolfson School of Mechanical and Manufacturing Engineering,
Loughborough University
, Loughborough, Leicestershire, LE11 3TU, UK
Steve J. Rothberg
Wolfson School of Mechanical and Manufacturing Engineering,
Loughborough University
, Loughborough, Leicestershire, LE11 3TU, UKe-mail: s.j.rothberg@lboro.ac.uk
J. Vib. Acoust. Feb 2006, 128(1): 8-20 (13 pages)
Published Online: July 7, 2005
Article history
Received:
October 21, 2004
Revised:
July 7, 2005
Citation
Halkon, B. J., and Rothberg, S. J. (July 7, 2005). "Rotor Vibration Measurements Using Laser Doppler Vibrometry: Essential Post-Processing for Resolution of Radial and Pitch/Yaw Vibrations." ASME. J. Vib. Acoust. February 2006; 128(1): 8–20. https://doi.org/10.1115/1.2149389
Download citation file:
Get Email Alerts
Related Articles
Rotor Balancing Without Trial Weights
J. Eng. Gas Turbines Power (July,2004)
Analysis of Random Mechanical Vibrations in Symmetrical Thin Plates Using Full-Field Vibration Measurements
J. Vib. Acoust (April,2021)
Experimental Measurement of Mode Shapes and Frequencies for Vibration of Plates by Optical Interferometry Method
J. Vib. Acoust (April,2001)
Vibration Measurements on Rotating Machinery Using Laser Doppler Velocimetry
J. Vib. Acoust (July,1994)
Related Proceedings Papers
Related Chapters
Vibration Measurement and Load Identification of Offshore Platforms
International Conference on Mechanical and Electrical Technology 2009 (ICMET 2009)
Concluding Remarks and Future Work
Ultrasonic Welding of Lithium-Ion Batteries
Experimental and Statistical Study on the Noise Generated by Surface Defects of Bearing Rolling Bodies
Bearing and Transmission Steels Technology